T-connection for wide band lambda sensor M18x1.5
T-connection for wide band lambda sensor M18x1.5
The thin copper pipe (6mm diameter, 50cm length) can be inserted in the exhaust silencer. Always try to insert at least 30cm to avoid mixture with fresh air as this will result in incorrect lambda readings.
The rubber hose (length 100cm) can be inserted in the exhaust gas extraction system so that exhaust gasses are sucked through the T-connector and pass the sensor.
Note: lambda sensor is not included
WB-T-LAMBDA-06
€75.00 excl. VAT
T-connection for wide band lambda sensor M18x1.5
The thin copper pipe (6mm diameter) can be inserted in the exhaust silencer. Always try to insert at least 30cm to avoid mixture with fresh air as this will result in incorrect lambda readings.
The rubber hose can be inserted in the exhaust gas extraction system so that exhaust gasses are sucked through the T-connector and pass the sensor.
Note: lambda sensor is not included
Dynoteg makes tuning easy!
T-connection for wide band lambda sensor M18x1.5
The thin copper pipe (6mm diameter, 50cm length) can be inserted in the exhaust silencer. Always try to insert at least 30cm to avoid mixture with fresh air as this will result in incorrect lambda readings.
The rubber hose (length 100cm) can be inserted in the exhaust gas extraction system so that exhaust gasses are sucked through the T-connector and pass the sensor.
Note: lambda sensor is not included