Dynoteg sprocket wheel for rotation speed sensor
Sprocket wheel for measuring dyno rotation speed. For very accurate speed measurements during your dyno runs.
SD-SS-TK48-50M8
€69.95 excl. VAT
Dynoteg sprocket wheel for dyno rotation speed sensor
Sprocket wheel 48 teeth with 50 mm bore or 60 teeth with 40 mm bore and M8 lock screw for Dynoteg dynamometer rotation speed sensor. These gear wheel sprockets are suitable for measuring roller speeds with the rotation speed sensor which is supplied with a Sportdevices SP1 / SP3 / SP5 test bench electronics kit.
| Type | : | SD-SS-TK60-50M8 | - | SD-SS-TK60-40M8 |
| Outside diameter | : | 124 | 124 | |
| Bore diameter | : | 50 | 40 | |
| Width | : | 35 | 35 | |
| Set screw | : | M8 | M8 | |
| Teeth | : | 60 | 60 |
To ensure good power measurements, it is very important to achieve a good stable assembly of the rotation speed sensor. That is why we also recommend the standard Dynoteg sensor bracket SD-SS-HP-BB (see accessories).
Dynoteg makes tuning easy!
- Weight
- 1,1 kg
- Material
- Steel
- Recommended electronic kit
- Sportdevices SP1 / SP3 / SP5 / SP6
Sprocket wheel for measuring dyno rotation speed. For very accurate speed measurements during your dyno runs.