Sportdevices weather station for chassis dyno electronics
Weather station for Sportdevices SP1/SP1+/SP3/SP5/SP6 test bench electronics. The temperature, air pressure and air humidity are stored automatically in each Sportdevices Sportdyno test. Perfect addition for your Dynoteg kart engine dyno or chassis dynamometer.
SD-WS-USB
€200.00 excl. VAT
Weather station for test bench elektronics of Sportdevices
External weather station for Sportdevices SP1/SP1+/SP3/SP5/SP6 dyno electronics. The temperature, air pressure and humidity are automatically stored in each Sportdyno test. The Sportdyno software automatically corrects the measured power to standard conditions by using the stored weather conditions. This enables you to compare tests from different days performed under different weather conditions. The weather station is connected to an USB port of the PC.
The weather station sends atmospheric data about once per second, which is stored by the SportDyno software at the start of the test.
Records following values:
- Air pressure range: 300 to 1100 mbar. Accuracy: +/-1 mbar.
- Air humidity. Accuracy: +/-3.5% RH.
- Air temperature range: -40 °C to 85 °C. Accuracy: +/-1 °C.
Dynoteg makes tuning easy!
- Height
- 23 mm
- Width
- 58 mm
- Length
- 64 mm
- Weight
- 0,15 kg
- Temperature range hose
- -40 °C to 85 °C
- Pressure range
- 300 t/m 1100 mbar
- Connection 1
- USB-A male
- Connection 2
- USB-mini male
- Recommended electronic kit
- Sportdevices SP1 / SP3 / SP5 / SP6
Weather station for Sportdevices SP1/SP1+/SP3/SP5/SP6 test bench electronics. The temperature, air pressure and air humidity are stored automatically in each Sportdevices Sportdyno test. Perfect addition for your Dynoteg kart engine dyno or chassis dynamometer.